Northfield #9 Double Spindle Shaper

Guards, aluminum dust spouts and hand brakes are standard equipment. This shaper is shown with 30" spindle centers.

Northfield Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. Available with either 24" or 30" between spindle centers. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust and chip extraction.

Prices:

Configuration	Price
24" 3 HP	Call for price × Contact Us Telephone (228) 207-1547 Send us an E-mail Request a Quote Hours of Operation Monday - Friday 8:00AM - 4:30PM CST Saturday and Sunday Closed
30" 3 HP
24" 5 HP
30" 5 HP
24" 7-1/2 HP
30" 7-1/2 HP
24" 10 HP
30" 10 HP
24" 15 HP
30" 15 HP

Specifications:

Diameter of Spindle (standard machine)		1"
Vertical Adjustment of Spindle		4-1/2"
Length of Spindle at Collar		5"
Size of Table:	24" center machine	30" x 60"
	30" center machine	30" x 66"
Distance Between Spindles		24" Std. or 30"
Height of Table Top		34-1/2"
Spindle Speed		8,000 RPM
Spindle Rotation		RH Spindle: Counterclockwise LH Spindle: Clockwise
Size of Dust Spout		4" - 4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower		3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole (Standard Machine)		4-1/2"
Floor Space:	24" center machine	44" x 60"
	30" center machine	44" x 66"
Domestic Shipping Weight		2000 lbs.
Export Shipping Weight		2300 lbs.
Cubic Measure Export Boxed		96 cu. ft.
Voltages		208, 230/460, 575 3 ph 60 hz

Extras:

• K-50 fence with hold down springs
• Micrometer adjust for K-50 fence
• 3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
• 6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
• 8" spindle length 1-3/8, and 1-1/2 solid spindle
• Opposite spindle rotation RH-CW, LH-CCW
• Reversing solid spindle with reversing switch
• Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
• Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
• 6" front and rear table extensions
• Detachable router top 1/2" hole
• 6000 and 4000 RPM spindle speed
• NEMA 12 electrics with fused disconnect
• 24-volt push-button
• Hand brake in lieu of foot brake
• Switch to disconnect power upon actuation of brake
• Miter gauge and dovetail slot (table ends only)
• Clockwise spindle rotation
• Miter gauge with dovetail slot
• Single phase 3, 5, 7-1/2" hp, 220-volt
• Throat hole and plates available: 8", 6-1/2" and nested
• Modifications to customer's order