Northfield Large Top Double Spindle Shaper
Guards, aluminum dust spouts and hand brakes are standard equipment
Northfield Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. The 42" x 84" table provides room for mounting feeders and gives full support for large jigs and fixtures. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust and chip extraction.
Prices:
| Configuration | Price |
| 3 HP | |
| 5 HP | |
| 7-1/2 HP | |
| 10 HP | |
| 15 HP |
Specifications:
| Diameter of Spindle (standard machine) | 1" |
| Vertical Adjustment of Spindle | 4-1/2" |
| Length of Spindle at Collar | 5" |
| Size of Table | 42" x 84" |
| Distance Between Spindles | 42" |
| Height of Table Top | 34-1/2" |
| Spindle Speed | 8,000 RPM |
| Spindle Rotation (Front of Machine) | RH Spindle: Counterclockwise LH Spindle: Clockwise |
| Size of Dust Spout | 4" - 4" dust spout requires approx. 400 CFM air flow for dust collection |
| Horsepower | 3, 5, 7-1/2, 10, 15 TEFC |
| Size of Throat Hole | 4-1/2" |
| Floor Space | 84 width x 45 deep |
| Domestic Shipping Weight | 3100 lbs. |
| Export Shipping Weight | 3500 lbs. |
| Cubic Measure Export Boxed | 128 cu. ft. |
| Voltages | 208, 230/460, 575 3 ph 60 hz |
Extras:
-
K-50 fence with hold down springs
-
Micrometer adjust for K-50 fence
-
3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
-
6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
-
8" spindle length 1-3/8, and 1-1/2 solid spindle
-
Opposite spindle rotation RH, CW, LH, CCW
-
Reversing solid spindle with reversing switch
-
Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
-
Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
-
Detachable router top 1/2" hole
-
Collet spindle (3/4" max. collet bore)
-
6000 and 4000 RPM spindle speed
-
NEMA 12 electrics with fused disconnect
-
24-volt push-button
-
Hand brake in lieu of foot brake
-
Switch to disconnect power upon actuation of brake
-
Miter gauge with dovetail slot
-
Single phase 3, 5, 7-1/2" hp, 220-volt
-
Throat hole and plates available: 8", 6-1/2" and nested
-
Modifications to customer's order
