Northfield Heavy Duty Shaper
Guard, aluminum dust spout and hand brake are standard equipment
Northfield Heavy Duty Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. The 42" x 42" table provides room for mounting feeders and gives full support for large jigs and fixtures. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust and chip extraction.
Prices:
| Configuration | Price |
| 3 HP | |
| 5 HP | |
| 7-1/2 HP | |
| 10 HP | |
| 15 HP | |
| 3 HP Single Phase | |
| 5 HP Single Phase | |
| 7-1/2 HP Single Phase |
Specifications:
| Diameter of Spindle (standard machine) | 1" |
| Vertical Adjustment of Spindle | 4-1/2" |
| Length of Spindle at Collar | 5" |
| Size of Table | 42" x 42" |
| Height of Table Top | 34-1/2" |
| Spindle Speed | 8,000 RPM |
| Spindle Rotation | Counterclockwise |
| Size of Dust Spout | 4" - 4" dust spout requires approx. 400 CFM air flow for dust collection |
| Horsepower | 3, 5, 7-1/2, 10, 15 TEFC |
| Size of Throat Hole | 4-1/2" |
| Floor Space | 42 width x 45 deep |
| Domestic Shipping Weight | 1500 lbs. |
| Export Shipping Weight | 1750 lbs. |
| Cubic Measure Export Boxed | 64 cu. ft. |
| Voltages | 208, 230/460, 575 3 ph 60 hz |
Extras:
-
K-50 fence with hold down springs
-
Micrometer adjust for K-50 fence
-
3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
-
6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
-
8" spindle length 1-3/8, and 1-1/2 solid spindle
-
Reversing solid spindle with reversing switch
-
Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
-
Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
-
Detachable router top 1/2" hole
-
6000 and 4000 RPM spindle speed
-
NEMA 12 electrics with fused disconnect
-
24-volt push-button
-
Hand brake in lieu of foot brake
-
Switch to disconnect power upon actuation of brake
-
Clockwise spindle rotation
-
Miter gauge with dovetail slot
-
Single phase 3, 5 hp, 220-volt
-
Throat hole and plates available: 8", 6-1/2" and nested
-
Modifications to customer's order
