Northfield Jump Saws

Models 208, 212, 410 and 410S

Prices:

Configuration	Model #	Price
5 HP Arbor Motor, 14" Saw Blade, 3 Phase*	208	Call for price × Contact Us Telephone (228) 207-1547 Send us an E-mail Request a Quote Hours of Operation Monday - Friday 8:00AM - 4:30PM CST Saturday and Sunday Closed
5 HP Arbor Motor, 14" Saw Blade, 1 Phase*	208
7-1/2 HP Arbor Motor, 16" Saw Blade, 3 Phase*	212
7-1/2 HP Arbor Motor, 16" Saw Blade, 1 Phase*	212
10 HP Arbor Motor, 18" Saw Blade, 3 Phase*	410
7-1/2 HP Arbor Motor, 18" Saw Blade, 3 Phase*	410
7-1/2 HP Arbor Motor, 18" Saw Blade, 1 Phase*	410
10 HP Arbor Motor, 18" Saw Blade, 3 Phase*	410S
* Specify right or left hand

Specifications:

	Model 208	Model 212	Model 410	Model 410S
Table Height	36"	36"	36"	36"
Table Top	27-1/4" x 31-1/2"	27-1/4" x 31-1/2"	27-1/4" x 31-1/2"	27-1/4" x 31-1/2"
Arbor Motor	5 HP 3600 RPM TEFC 230/460/60/3	7-1/2 HP 3600 RPM TEFC 230/460/60/3	10 HP 3600 RPM TEFC 230/460/60/3	10 HP 3600 RPM TEFC 230/460/60/3
Electrical	Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure	Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure	Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure	Magnetic Starter with 110 Volt at Push Button in NEMA 1 Enclosure
Air Equipment	3" x 6" Stroke Cylinder Filter, Regulator and Lubricator, Single Palm Switch-Air Operated	3" x 6" Stroke Cylinder Filter, Regulator and Lubricator, Single Palm Switch-Air Operated	3" x 6" Stroke Cylinder Filter, Regulator and Lubricator, Single Palm Switch-Air Operated	3" x 6" Stroke Cylinder Filter, Regulator and Lubricator, Single Palm Switch-Air Operated
Saw Arbor	1" Stress-proof steel w/4" Saw Collars, 3600 RPM, Timken Bearings, Vee Belt Drive	1" Stress-proof steel w/4" Saw Collars, 3600 RPM, Timken Bearings, Vee Belt Drive	1" Stress-proof steel w/4" Saw Collars, 2900 RPM, Timken Bearings, Vee Belt Drive	1" Stress-proof steel w/4" Saw Collars, 2900 RPM, Timken Bearings, Vee Belt Drive
Saw Blade	14" Diameter, 1" Bore	16" Diameter, 1" Bore	18" Diameter, 1" Bore	18" Diameter, 1" Bore
Cut Capacity	2" Thick x 8" Wide	2" Thick x 12" Wide	4" Thick x 10" Wide, Fence Forward 2" Thick x 14" Wide, Fence Rearward	4" Thick x 10" Wide, Fence Forward 2" Thick x 14" Wide, Fence Rearward
Operating Speed	20-100 CPM-Adj. via Flow Controls	20-100 CPM-Adj. via Flow Controls	20-60 CPM-Adj. via Flow Controls	24 CPM at max blade elevation 40 CPM at blade elevation to cut a 1" x 4" Adj. via flow controls
Sawdust Outlet	3" Diameter, Rear Exit, 350 CFM	3" Diameter, Rear Exit, 350 CFM	3" Diameter, Rear Exit, 350 CFM	3" Diameter, Rear Exit, 350 CFM
Shipping Weight	750 lbs. (950 lbs. export, 50 cu. ft.) 38" x 40" x 56" H	850 lbs. (1050 lbs. export, 50 cu. ft.) 38" x 40" x 56" H	900 lbs. (1100 lbs. export, 53 cu. ft.) 38" x 40" x 60" H	900 lbs. (1100 lbs. export, 53 cu. ft.) 38" x 40" x 60" H

Extras:

• Two palm control-anti tie down
• NEMA 12 Electrics with fusible disconnect
• In feed roller table 10' long
• Out feed graduated stop bar with four stops 8' long
• Additional stops
• Air over oil feed for non ferrous cutting
• Lennox lube coolant system for blade, pump type, two nozzles
• Blades
• Special Voltages and Hz
• Custom Roller Conveyors

For model 410S

• Two palm control-anti tie down
• NEMA 12 Electrics with fusible disconnect
• Pressure switch on upper guard cylinder - replaces mechanical switch
• Air over oil feed for non ferrous cutting
• Lennox lube coolant system for blade, pump type, two nozzles
• Filled in table center
• In feed and out feed roller tables 10ft. sections with one leg
• Out feed graduated stop bar with four stops 10' long
• Additional stops
• Out feed drop-off table 10 ft. with 1" graduated stop bar and 4 stops
• 2" high plain fences
• 4" high plain fences
• Steel decks on Tables
• 10 degree tilt base for for up cut saw
• 10 degree tilt brackets for tables
• Mount ledges for TigerStops™
• Blades
• Special Voltages and Hz
• Custom Roller Conveyors