PMK Systems C-1203 Coping/End Matching System
Manufacturing of cabinet doors, interior & exterior doors and flooring simplified, with the PMK Systems C-1203 Coping/End Matching System No back-up piece or chip breaker required, Coping of square, single or double profiled parts, as well as end matching with no chipping, blow-out or splintering, and Tooling change-over time is approximately 2 minutes or less!
- Chip free coping or end-matching of squares or profiled parts without the need of a back-up piece or chip breaker.
- Two counter rotating spindles, 1 ¼” Diameter – 7000 RPM
- 7.5HP Main Motor, 230/460 volts (please specify your voltage). @230 volts/30amps, @ 460 volts/20amps.
- Maximum cutter diameter 5” OD, Minimum Cutter diameter 3.5” OD.
- Maximum length of part 2 ½” thick & 9 ½” wide.
- Minimum length of part 3”
- Minimum width of part is determined by the O.D. of the cutter and if the part is profiled or not.
- Unlimited length of part.
- The C-1203 has External flow valve that allow you to adjust the speed of the sliding table according to the thickness, width & density of the wood you are profiling.
- Cycle time adjustable from 4 to 10 seconds. Factory set cycle time at 4 seconds.
- The C-1203 has the capacity to stack tooling. Maximum two cutters per spindle.
- Dust Hood with 5” port.
- Quick tool change (less than 2 minutes)
- THK style rails for guidance of carriage stroke and hold down clamp.
- Side pressure clamp insures proper alignment with fence.
- THE C-1203 IS RELIABLE, HEAVY DUTY, TESTED & PROVEN.
- The C-1203 has a small foot print 44”wide, 32” deep, and 42” high.
- The C-1203 meets UL & CSA Electrical Standards.
- Machine weight 1,081 lbs (+/-).
Now Standard equipment:
- Includes Aluminum Sub-Table for stacking of tooling.
- Includes Second side pressure clamp, when using the sub-table.
Options:
- 5HP, Single Phase Motor 230 Volts.
- Micro Adjustable Back Fence
- Voltage Change to 460 Volts (all machines pre-wired 230 volts)
Options for Standard Versions:
- New Touch Screen Monitor for PLC Controller - $1,495.00
- 10HP Motor, 230 or 460 Volt (please specify your voltage) - $1,495.00
- 5HP Single Phase Motor, 230 Volts - $1,495.00
- Two Custom 1” Spindles - $1,595.00
- Two Custom 40mm Spindles - $1,595.00
- Micro Adjustable back fence - $695.00
Options for HSK Versions:
- Additional Spindle adaptors/Milling arbors - $600.00
- New Touch Screen Monitor for PLC Controller - $1,495.00
| Configuration | Model # |
Price |
| C-1203 PLC Coping & End-Matching Machine (Standard Version) | C-1203 PLC | |
| PMK C-1203 PLC & HSK, Coping & End-Matching Machine | PMK C-1203 PLC & HSK |
ALL PMK MACHINES LISTED ARE SPECIAL ORDERS.
(NOTE ALL SPECIAL ORDERS REQUIRE A 50% DEPOSIT WITH THE ORDER)
