Northfield Foundry and Machine Co.

Northfield Heavy Duty Large Top Shaper

Northfield Heavy Duty Large Top Shaper

Guard, aluminum dust spout and foot brake are standard equipment

Northfield Heavy Duty Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. The 44" x 72" table provides room for mounting feeders and gives full support for large jigs and fixtures. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust and chip extraction.

Prices:

Configuration
Price
3 HP
$14,970.00
5 HP
$15,100.00
7-1/2 HP
$15,230.00
10 HP
$15,380.00
15 HP
$16,020.00

 

Specifications:

Diameter of Spindle (standard machine) 1"
Vertical Adjustment of Spindle 4-1/2"
Length of Spindle at Collar 5"
Size of Table 44" x 72"
Height of Table Top 37"
Spindle Speed 8,000 RPM
Spindle Rotation Counterclockwise
Size of Dust Spout 4" - 4" dust spout requires approx. 400 CFM air flow for dust collection
Horsepower 3, 5, 7-1/2, 10, 15 TEFC
Size of Throat Hole 4-1/2"
Floor Space 72 width x 48 deep
Domestic Shipping Weight 2700 lbs.
Export Shipping Weight 3100 lbs.
Cubic Measure Export Boxed 104 cu. ft.
Voltages 208, 230/460, 575 3 ph 60 hz

Extras:

  • K-50 fence with hold down springs
  • Micrometer adjust for K-50 fence
  • 3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
  • 6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
  • 8" spindle length 1-3/8, and 1-1/2 solid spindle
  • Reversing solid spindle with reversing switch
  • Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
  • Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
  • Detachable router top 1/2" hole
  • Collet spindle (3/4" max collet bore)
  • 6000 and 4000 RPM spindle speed
  • NEMA 12 electrics with fused disconnect
  • 24-volt push-button
  • Switch to disconnect power upon actuation of brake
  • Clockwise spindle rotation
  • Single phase 3, 5, 7-1/2" hp, 220-volt
  • Throat hole and plates available: 8", 6-1/2" and nested
  • Digital read-out spindle position
  • Spindle crank on front of machine
  • Modifications to customer's order

Financing Available

Have a question or need a custom quote?

For more information call us at 228-207-1547. Prices and technical specifications are subject to change without notice. We cannot be held responsible for typographical errors.