Timesavers Model MS300-5 Moulding/Profile Sander
The MS300-5 is designed to finish-sand, sealer-sand or de-nib three sides of work-pieces up to 12" wide. The sanding arbors consist of two (2) top spindles, one (1) right side spindle, one (1) left side spindle and one (1) angular left side spindle. The top spindles counter-rotate to provide even sanding.
Top spindles are powered by independent 3/4 HP motors. The right and left spindles are powered by 1/2 HP motors. The angular spindle is powered by a 1/3 HP motor. One (1) A.C. Frequency Inverter controls RPM of the top spindles and one (1) A.C. Frequency Inverter controls RPM of the side spindles. Spindle speed is variable from 200-1200 RPM.
Top horizontal spindles are hand-wheel adjustable for part thickness and can be manually tilted to match the profile. The vertical right and left spindles can be manually tilted. The angular left spindle can be manually tilted and is hand-wheel adjustable for height and hand-wheel adjustable for horizontal adjustment to match the profile. All spindles are adjustable for wear.
The spindles are hexagonal in design to assure positive power transfer from the motors to the abrasives and can use any combination of specialized abrasives, which provide the most effective sanding action in the industry. Top spindles are 12" long. The right and left side spindles are 5.5" long. The angular spindle is 4" long.
Spring-loaded holddown rolls are adjustable by a hand wheel. Rolls are on 14.5" centers to feed a minimum length 29" part. The roller feed system is powered by a 1/4 HP motor with an A.C. Frequency Converter. The feed speed is adjustable from 20-40 FPM.
Dust outlet sizes: Four (4), 3.5" diameter includes one (1) outlet for each top spindle and one (1) for the right and left spindles at 450 CFM each. There is also one (1) 2.5" diameter outlet for angular spindle at 300 CFM. Total CFM is 2,100 @ 5" of static pressure.
Machine length-width-height: 72" x 48" x 59"
Feed/Passline height: 34"
Maximum work piece width: 11"
Maximum work piece thickness: 3"
Minimum work piece length: 29"
Dust Extraction: 2,100 CFM
Total shipping weight: 1,030 lbs.
Power requirements: 230/3/60
Full load amps: 25 @ 230 volt.
*Price does not include hubs or abrasives. These will be determined by application and quoted separately.