PMK Systems

PMK Systems C-1205 Coping/End Matching System

PMK Systems C-1205 Coping/End Matching System

Manufacturing of cabinet doors, interior & exterior doors and flooring simplified, with the PMK Systems C-1205 Coping/End Matching System No back-up piece or chip breaker required, Coping of square, single or double profiled parts, as well as end matching with no chipping, blow-out or splintering, and Tooling change-over time is approximately 2 minutes or less!

  • Chip free coping or end-matching of squares or profiled parts without the need of a back-up piece or chip breaker.
  • Two counter rotating spindles, 1 ¼” Diameter – 7000 RPM
  • 7.5HP Main Motor, 230/460 volts (please specify your voltage). @ 230 volts/30amps, @ 460 volts/20amps.
  • Maximum cutter diameter 5” OD, Minimum Cutter diameter 3.5” OD.
  • Maximum size of part 2 ½” thick & 13 ½” wide.
  • Minimum length of part 3”
  • Minimum width of part is determined by the O.D. of the cutter head and if the part is profiled or not.
  • Unlimited length of part.
  • The C-1205 has External flow valve that allow you to adjust the speed do the sliding table according to the thickness, width & density of the wood you are profiling.
  • Cycle time adjustable from 4 to 10 seconds. Factory set cycle time at 4 seconds.
  • The C-1205 has the capacity to stack tooling. Maximum two cutters per spindle.
  • Dust Hood with 5” port.
  • Quick tool change (less than 2 minutes)
  • THK style rails for guidance of carriage stroke and hold down clamp.
  • Side pressure clamp insures proper alignment with fence.
  • THE C-1205 IS RELIABLE, HEAVY DUTY, TESTED & PROVEN.
  • The C-1205 has a small foot print 52” wide, 39” deep, and 42” high.
  • The C-1205 meets UL & CSA Electrical Standards.
  • Machine weight 1,297 lbs (+/-).

Now Standard equipment;

  • Includes Aluminum Sub-Table for stacking of tooling.
  • Includes Second side pressure clamp, when using the sub-table.

Options:

  • 5HP, Single Phase 230 Volts.
  • Micro Adjustable Back Fence.
  • Voltage Change to 460 Volts (all machines pre-wired 230 Volts).

Options for Standard Versions:

  • New Touch Screen Monitor for PLC Controller - $1,495.00
  • 10HP Motor, 230 or 460 Volt (please specify your voltage) - $1,495.00
  • 5HP Single Phase Motor, 230 Volts - $1,495.00
  • Two Custom 1” Spindles - $1,595.00
  • Two Custom 40mm Spindles - $1,595.00
  • Micro Adjustable back fence - $695.00

Options for HSK Versions:

  • Additional Spindle adaptors/Milling arbors - $600.00
  • New Touch Screen Monitor for PLC Controller - $1,495.00
Prices:
Configuration
Model #
Price
C-1205 PLC Coping & End-Matching Machine (Standard Version) C-1205 PLC
$20,995.00
PMK C-1205 PLC HSK, Coping & End-Matching Machine PMK C-1205 PLC HSK
$44,995.00

ALL PMK MACHINES LISTED ARE SPECIAL ORDERS.
(NOTE ALL SPECIAL ORDERS REQUIRE A 50% DEPOSIT WITH THE ORDER)



Financing Available

Have a question or need a custom quote?

For more information call us at 228-207-1547. Prices and technical specifications are subject to change without notice. We cannot be held responsible for typographical errors.