Champion Advantage Series 5-25 HP
A little over 85 years ago Champion’s amazing air compressors blazed new trails in the compressed air market. Today, Champion air compressors are still engineered with the same philosophy as we had back then. We design industrial grade air compressors for the professional. The Champion Advantage Series offers a complete line of compressed air packages that meet any application.
The Advantage Series has been carefully engineered to
stand up to years of use.
Every Advantage Series compressor arrives with up to six standard, pre-installed accessories.
Standard Equipment Features
Heavy Duty Two Stage, Splash Lubricated Air Compressor Pump
Integral Cylinder Head
Intercoolers for Cooling Between Stages
Reliable High Flow Disc Valves
Oversized Main Bearings
Oil Level Site Glass
Centrifugal Unloader for Loadless Starting
0-300 PSIG Air Pressure Gauge
Bucket High Drain Valve
Factory Fill With ChampLub Lubricants
ASME Code Air Receiver
OSHA Approved Belt Guard
Compressor Pump Warranty
Each new Champion Assembled Unit has a five (5) year warranty on the compressor pump only, against defects in materials or workmanship under normal use and service, from the date of installation or sixty-six (66) months from the date of shipment by Champion or a Champion distributor, whichever may occur first.
The five-year extended warranty covers parts and labor
and is prorated over the five years as follows:
Year One — 100% coverage
Year Two — 90% coverage
Year Three — 80% coverage
Year Four — 70% coverage
Year Five — 60% coverage
Head valves are warranted for Year One only. Champion makes no warranty on components and/or accessories furnished to Champion by third parties, such as electric motors, gasoline engines and controls. These are warranted only to the extent of the original manufacturer’s warranty to Champion. Electric motors must be equipped with thermal overload protection to have warranty consideration.
The extended five-year warranty will apply to ASME air receivers if they are installed on rubber vibro isolator pads or approved equivalent.
U. L. Standards
Champion, in common with other major, industrial compressor manufacturers, does not market compressors which are U.L. listed. In general, U.L. is concerned with electrical components that may be utilized on compressor units, rather than a complete compressor package or system. All electrical components used on Champion compressors are U.L. listed. Each component – motor, starter, pressure switch, control panel – carries a U.L. identification mark on the nameplate or inside the electrical enclosure cover. The mark will be the letters “UR” reversed (as if held up to a mirror), indicating the item is “recognized” by U.L. On tank mounted units, the air receiver tank and tank pressure relief valve are ASME Code. The tank carries a National Board Registration number which appears on a stamped, metal plate welded to the tank.